Panasonic KX-TG7511FX Operating Instructions Manual

Programming33Viewing/editing/erasing bar callnumbers1 1 i {#}{2}{1}{7}2 {V}/{^}: Select the desired entry.L To exit, press {ic}.3 To edit a number:~ i Edit the phone number.i M i {ic}To erase a number:W i {V}/{^}: “Yes” i Mi {ic}Note:L When editing, press the desired dialkey to add, ^ to erase.Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please makenote of your new PIN. The unit will notreveal the PIN to you. If you forgetyour PIN, contact an authorisedservice centre.1 1 i {#}{1}{3}{2}2 Enter the current 4-digit base unitPIN (default: “0000”).3 Enter the new 4-digit base unit PIN.i M i {ic}Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered to asingle base unit.Important:L The additional handset modelrecommended for use with this unit isnoted on page 5. If another handsetmodel is used, certain operations(handset settings, base unit settings,etc.) may not be available.Additional base unitsHandsets can be registered to up to 4base units, allowing you to addadditional base units and extend thearea in which your handset(s) can beused. If a handset moves out of range ofits base unit when “Auto” is selected onbase unit (page 34), it looks for anotherbase unit to make or receive calls. Abase unit and the handsets itcommunicates with is called a “radiocell”.Note:L Calls are disconnected when thehandset moves from one radio cell toanother.Registering a handset to abase unitThe supplied handset and base unit arepre-registered. If for some reason thehandset is not registered to the base unit(for example, _ is displayed even whenthe handset is near the base unit), re-register the handset.1 Handset:1 i {#}{1}{3}{0}2 {V}/{^}: Select a base unit number.i ML This number is used by thehandset as a reference only.3 Base unit:Proceed with the operation for yourmodel.TG7511_7521FX(e).book Page 33 Tuesday, March 9, 2010 3:22 PM