Panasonic KX-TG7511FX Operating Instructions Manual

Answering System44Erasing all messagesPress {4} 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have beenrecorded, u is displayed on thehandset with the total number of newmessages.1 To listen to new messages:1 i {#}{3}{2}{3}To listen to all messages:1 i {#}{3}{2}{4}2 When finished, press {ic}.Note:L To switch to the receiver, press {C}.L If “Messages Full” is shown on thedisplay, u and the total number ofnew messages are not displayed.Listening to messages fromthe message listYou can select the item to play back.1 1 i {#}{3}{2}{9}2 {V}/{^}: Select the desired item fromthe message list. i 0L You can erase the selectedmessage as follows:W i {V}/{^}: “Yes” i M3 When finished, press {ic}.Note:L If the item has already been heard,“Q” is displayed, even if it was heardusing another handset.L “Message” is displayed in themessage list for any recordedconversations or if the unit cannotreceive caller information.Operating the answeringsystem1 i D i M*1 If pressed within the first 5 seconds ofa message, the previous message isplayed except when playing backfrom the message list.Key Operation{^} or {V} Adjust the receiver orspeaker volume(during playback){1} or {<} Repeat message(during playback) *1{2} or {>} Skip message(during playback) *2{3} Enter the“Settings” menu{4} Play new messages{5} Play all messages{6} Play greetingmessage{7}{6} Record greetingmessage{8} Turn answeringsystem on1 Pause message *3{9} or O Stop recordingStop playback{0} Turn answeringsystem off{*}{4}*4 Erase currentlyplaying message{*}{5} Erase all messages{*}{6} Reset to a pre-recorded greetingmessageTG7511_7521FX(e).book Page 44 Tuesday, March 9, 2010 3:22 PM