Panasonic KX-TG7513C Operating Instructions Manual

Programming30Block calls without phone numberYou can reject a call without phonenumber including “Unavailable Name& No.”, “Private caller”, or “Longdistance”.1 {MENU} i {#}{2}{4}{0}2 {V}/{^}: Select the desired setting.i {SAVE} i {OFF}Viewing/editing/erasing call blocknumbers1 {MENU} i {#}{2}{1}{7}2 {V}/{^}: Select the desired entry.L To exit, press {OFF}.3 To edit a number:{EDIT} i Edit the phone number.i {SAVE} i {OFF}To erase a number:{ERASE} i {V}/{^}: “Yes” i{SELECT} i {OFF}Note:L When editing, press the desired dialkey to add, {CLEAR} to erase.L When viewing, “Block w/o num” isdisplayed if the block calls withoutphone number feature is turned on. Toturn the feature off: {ERASE} i {V}i {SAVE} i {OFF}Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered tothe base unit.Important:L See page 5 for information on theavailable model.Registering a handset to thebase unitThe supplied handset and base unit arepre-registered. If for some reason thehandset is not registered to the baseunit, re-register the handset.1 Handset:{MENU} i {#}{1}{3}{0}2 Base unit:■ KX-TG7511 series: page 3Press and hold {LOCATOR} forabout 5 seconds. (No registrationtone)■ KX-TG7531/KX-TG7571 series:page 3Press and hold {LOCATOR} forabout 5 seconds until theregistration tone sounds.L If all registered handsets startringing, press the same button tostop. Then repeat this step.L The next step must be completedwithin 90 seconds.3 Handset:Press {OK}, then wait until a longbeep sounds.Note:L While registering, “Base inregistering” is displayed on allregistered handsets.L When you purchase an additionalhandset, refer to the additionalhandset’s installation manual forregistration.TG75xxC(e).book Page 30 Monday, January 18, 2010 9:32 AM