Useful Information51Industry Canada Notices and other informationNOTICE:This equipment meets the applicableIndustry Canada Terminal EquipmentTechnical Specifications. This is confirmedby the registration number. Theabbreviation, “IC:”, before the registrationnumber signifies that registration wasperformed based on a Declaration ofConformity indicating that Industry Canadatechnical specifications were met. It doesnot imply that Industry Canada approvedthe equipment.And, the term “IC:” signifies that IndustryCanada radio technical specifications weremet.Before installing this equipment, usersshould ensure that it is permissible to beconnected to the facilities of the localtelecommunications company. Theequipment must also be installed using anacceptable method of connection. Thecustomer should be aware that compliancewith the above conditions may not preventdegradation of service in some situations.Repairs to certified equipment should becoordinated by a representative designatedby the supplier. Any repairs or alterationsmade by the user to this equipment, orequipment malfunctions, may give thetelecommunications company cause torequest the user to disconnect theequipment.devices subject only to the requirement thatthe sum of the Ringer Equivalence Numbersof all the devices does not exceed 5.The Ringer Equivalence Number (REN) ofthis unit:(found on the bottom of the unit).NOTICE:Operation is subject to the following twoconditions: (1) this device may not causeinterference, and (2) this device must acceptany interference, including interference thatmay cause undesired operation of thedevice.Privacy of communications may not beensured when using this telephone.Some cordless telephones operate atfrequencies that may cause interference tonearby TVs and VCRs. To minimize orprevent such interference, the base of thecordless telephone should not be placednear, or on top of, a TV or VCR. Ifinterference is experienced, move thecordless telephone further away from the TVor VCR. This will often reduce, or eliminate,interference.RF Exposure Warning:NOTICE:The Ringer Equivalence Number (REN)assigned to each terminal device provides anindication of the maximum number ofterminals allowed to be connected to atelephone interface. The termination on aninterface may consist of any combination ofUsers should ensure, for their own protection,that the electrical ground connections of thepower utility, telephone lines and internalmetallic water pipe system, if present, areconnected together. This precaution may beparticularly important in rural areas.Caution:Users should not attempt to make suchconnections themselves, but should contactthe appropriate electric inspection authority,or electrician, as appropriate.L This product complies with IC radiationexposure limits set forth for anuncontrolled environment.L To comply with IC RF exposurerequirements, the base unit must beinstalled and operated 20 cm (8 inches) ormore between product and all person’sbody (excluding extremities of hands,wrist and feet).L This product may not be collocated oroperated in conjunction with any otherantenna or transmitter.L The handset may be carried and operatedwith only the specific provided belt-clip.Other non-tested belt-clips or similarbody-worn accessories may not complyand must be avoided.TG75xxC(e).book Page 51 Monday, January 18, 2010 9:32 AM