Panasonic KX-TG7733S Operating Instructions Manual

Also see for KX-TGA470: Service manual Operating instructions Installation manual Installation manual Installation guide

Panasonic KX-TG7733S Operating Instructions Manual Manual pdf 19 page image

Link to cell settingsSelecting which unit receivescellular callsYou can select which unit rings and receivescalls for a cellular line. When “All” isselected, all handsets and the base unit ring.1 MMENUN2 For CELL 1: #6271For CELL 2: #62723 MbN: Select the desired handset or “All”.4 MSAVEN a MOFFNNote:R When you select a specific handset toreceive calls for a cellular line:– other handsets cannot answer the calls.– the base unit can answer the calls eventhough it does not ring. However, youcan make the base unit ring by adjustingthe base unit ringer volume (page 35).(KX-TG7741 series: page 3)R When you change the setting to “All”, thebase unit ringer volume also returns to thelowest level even if the ringer volume hasbeen changed.Ring as cell modeOnce this feature is turned on, the handsetand base unit ring using the same ringer toneas your cellular phone.The following settings are available:– “Off”: Turn this feature off to use theringer tones of the handset and base unit.Caller information is announced dependingon the Talking Caller ID setting (page 37).– “On (with Talking CID)”(default): The handset and base unit useyour cellular phone’s ringer tone. Callerinformation is announced even if theTalking Caller ID is turned off.– “On (without Talking CID)”: Thehandset and base unit use your cellularphone’s ringer tone. Caller information isnot announced even if the Talking Caller IDis turned on.Important:R To use this feature, your cellular phonemust support Bluetooth in-band ringtone.Refer to your cellular phone’s operatinginstructions.1 MMENUN2 For CELL 1: #6141For CELL 2: #61423 MbN: Select the desired setting.4 MSAVEN a MOFFNNote:R The units use the preset ringer tones(page 37) instead of your cellular phone’sringer tone when a cellular call is beingreceived if:– your cellular phone is in silent mode(depending on your cellular phone).– the base unit is in use.– 2 handsets are sharing a landline call.R If your cellular phone is in silent mode with“On (with Talking CID)” set, the unitannounces caller information even whenTalking Caller ID is turned off (page 37).To use the handset ringer toneinstead of your cellular phone’sringer toneSelect “Off” in step 3, “Ring as cell mode”,page 19.To change the handset ringer tone for acellular line, see page 35.Auto connection to the cellularphoneAfter registration, your cellular phone isconnected to the base unit. If you move thecellular phone out of base unit range, thecellular phone is disconnected from the baseunit. This feature allows the base unit to try toreconnect the cellular phone at regularintervals when it returns within base unitrange. You can set the interval. The defaultsetting is “1 min”.For assistance, please visit http://www.panasonic.com/help 19Link to Cell