Panasonic KX-TG7733S Operating Instructions Manual

Also see for KX-TGA470: Service manual Operating instructions Installation manual Installation manual Installation guide

Panasonic KX-TG7733S Operating Instructions Manual Manual pdf 23 page image

and/or PIN in the phonebook, a pause is alsoneeded (page 32).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MPAUSEN2 Dial the phone number. a M NNote:R A 3.5 second pause is inserted each timeMPAUSEN is pressed.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press M N or M Nwhen the unit rings.R To answer a cellular call, you can alsopress MCELLN.R You can also answer the call bypressing any dial key from 0 to 9,*, or #. (Any key answer feature)2 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press M N. To turn this featureon, see page 38.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MjN or MkN repeatedly to select thedesired volume.n Programming the volume beforehand:1 To change the cellular line ringervolume:For CELL 1: MMENUN#6281For CELL 2: MMENUN#6282To change the landline ringervolume:MMENUN#1602 MbN: Select the desired volume.3 MSAVEN a MOFFNTemporary handset ringer offWhile the handset is ringing for a call, you canturn the ringer off temporarily by pressing M N.Useful features during acallHoldThis feature allows you to put an outside callon hold.1 Press MMENUN during an outside call.2 MbN: “Hold” a MSELECTN3 To release hold on the cellular line:Press MCELLN.R Another handset user can take the call:MCELLN*1 a MSELECTN*1 The call is taken when:– only 1 cellular phone isregistered.– the line is set to make cellularcalls (page 20).R The base unit user can take the call bypressing MCELL 1N or MCELL 2N.(KX-TG7741 series: page 3)To release hold on the landline:Press M N.R Another handset user can take the callby pressing M N.R The base unit user can take the call bypressing MSP-PHONEN.(KX-TG7741 series: page 3)Note:R If a call is kept on hold for more than 9minutes, an alarm tone starts to sound andthe ringer indicator flashes rapidly. After 1additional minute on hold, the call isdisconnected.R If another phone is connected to the sameline, you can also take the call by lifting itshandset.For assistance, please visit http://www.panasonic.com/help 23Making/Answering Calls Using the Handset