Panasonic KX-TG7733S Operating Instructions Manual

Also see for KX-TGA470: Service manual Operating instructions Installation manual Installation manual Installation guide

Panasonic KX-TG7733S Operating Instructions Manual Manual pdf 28 page image

Adjusting the base unit ringer volumen While the base unit is ringing for anincoming call:Press MjN or MkN repeatedly to select thedesired volume.R To turn the ringer off, press and holdMkN until the unit beeps.n Programming the volume beforehand:1 To change the cellular line ringervolume:For CELL 1: MMENUN#*6281For CELL 2: MMENUN#*6282To change the landline ringervolume:MMENUN#*1602 MbN: Select the desired volume.3 MSAVEN a MOFFNUseful features during acallHoldThis feature allows you to put an outside callon hold.1 Press MHOLDN during an outside call.2 To release hold on the cellular line:Press MCELL 1N or MCELL 2N.R A handset user can take the call:MCELLN*1 a MSELECTN*1 The call is taken when:– only 1 cellular phone isregistered.– the line is set to make cellularcalls (page 20).To release hold on the landline:Press MSP-PHONEN.R A handset user can take the landlinecall by pressing M N.Note:R While a cellular line is on hold, the CELL 1or CELL 2 indicator flashes red. While alandline call is on hold, the SP-PHONEindicator flashes.R If a call is kept on hold for more than 9minutes, an alarm tone starts to sound.After 1 additional minute on hold, the call isdisconnected.R If another phone is connected to the sameline, you can also take the call by lifting itshandset.MuteWhile mute is turned on, you can hear theother party, but the other party cannot hearyou.1 Press MMUTEN during conversation.R The SP-PHONE indicator on the baseunit flashes.2 To return to the conversation, pressMMUTEN again.Flash for landline callsMFLASHN allows you to use the specialfeatures of your host PBX such as transferringan extension call, or accessing optionaltelephone services.Note:R To change the flash time, see page 38.For call waiting service usersTo use call waiting, you must first subscribewith your service provider/telephone company.This feature allows you to receive calls whileyou are already talking on the phone. If youreceive a call while on the phone, you will heara call waiting tone.1 Press MCALL WAITN to answer the 2ndcall.2 To switch between calls, press MCALLWAITN.Note:R Please contact your service provider/telephone company for details andavailability of this service in your area.28 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls Using the Base Unit