Panasonic KX-TG8100E Operating Instructions Manual

Also see for KX-TG8100: Operating instructions

Preparation11Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333Battery strengthPanasonic Ni-MH battery performance(included batteries)Note:L It is normal for batteries not to reach fullcapacity at the initial charge. Maximumbattery performance is reached after a fewcomplete cycles of charge/discharge(use).L Actual battery performance depends on acombination of how often the handset is inuse and how often it is not in use(standby).L Battery operating time may be shortenedover time depending on usage conditionsand ambient temperature.L Even after the handset is fully charged,the handset can be left on the base unit orcharger without any ill effect on thebatteries.L The battery strength may not be displayedcorrectly after you replace the batteries. Inthis case, place the handset on the baseunit or charger and charge for at least 7hours.Screen saver modeThe backlight will turn off completelyafter 1 minute of inactivity if the handset isnot on the base unit or charger.To use the handset when it is in screensaver mode, first press {ih} to turn thedisplay on again.Turning the power on/offPower onPress {ih} for about 1 second.Power offPress {ih} for about 2 seconds.Symbols used in theseoperating instructionsBattery icon Battery strength1 High2 Medium3 LowWhen flashing: Needsto be charged.Operation Operating timeIn continuous use 12 hours max.In continuousstandby mode150 hours max.Symbol Meaning" Press " (middle soft key).i Proceed to the next operation.# Press # (middle soft key).jXK*1I*2NLMSelect the mentioned handsetmenu icon (page 8).Example: N (handset setupmenu icon)Select N by pressing {^}, {V},{<}, or {>}.“ ” Select the words in quotationsshown on the display (e.g.,“Time Settings”) bypressing {^} or {V}.*1 KX-TG8100 and KX-TG8102 only*2 KX-TG8120 and KX-TG8122 onlyTG8100-8120E(e).book Page 11 Friday, March 3, 2006 10:34 AM