Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press .2 Press M N or .3 When you finish talking, press M N orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press M N.R Speak alternately with the other party.2 When you finish talking, press M N.Note:R For best performance, use thespeakerphone in a quiet environment.R To switch back to the receiver, press M N/M N.Adjusting the receiver or speakervolumePress MDN or MCN repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 (right soft key) or MEN (T)2 MbN: Select the desired phone number.3 M NErasing a number in the redial list1 (right soft key) or MEN (T)2 MbN: Select the desired phone number.a3 MbN: “Yes” a a M NPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 22).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 0 a2 Dial the phone number. a M NNote:R A 3 second pause is inserted each timeis pressed.Answering callsWhen a call is being received, the smartfunction indicator flashes rapidly.1 Lift the handset and press M N or M Nwhen the unit rings.R You can also answer the call bypressing any dial key from 0 to 9,*, or #. (Any key answer feature)2 When you finish talking, press M N orplace the handset on the base unit orcharger.Using the smart function keyWhen the smart function indicator flashesrapidly, press MSmart functionN.R You can answer the call even if the handsetis placed on the base unit or charger(page 15).You can finish talking by pressing M Nwithout lifting up the handset.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press M N. To turn this featureon, see page 27.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MDN or MCN repeatedly to select thedesired volume.17Making/Answering Calls