Panasonic KX-TG8411BX Operating Instructions Manual

Also see for KX-TG8421BX: Service manual

Panasonic KX-TG8411BX Operating Instructions Manual Manual pdf 25 page image

Programming252 {V}/{^}: “Ringer Setup” i M3 {V}/{^}: “Night Mode” i M4 {V}/{^}: “On/Off” i M5 {V}/{^}: Select the desired setting.i ML If you select “Off”, press {ih}to exit.6 Enter the desired hour and minuteyou wish to start this feature. iM7 Enter the desired hour and minuteyou wish to end this feature. iM8 {ih}L When the night mode is set, f isdisplayed.Note:L To correct a digit, push the joystick leftor right to move the cursor to the digit,then make the correction.Changing the start and end time1 1 (centre of joystick) i N iM2 {V}/{^}: “Ringer Setup” i M3 {V}/{^}: “Night Mode” i M4 {V}/{^}: “Start/End” i M5 Continue from step 6, “Turning nightmode on/off”, page 24.Setting the ring delayThis setting allows the handset to ringduring night mode if the caller waits longenough. After the selected amount oftime passes, the handset rings. If youselect “No Ringing”, the handsetnever rings during night mode.1 1 (centre of joystick) i N iM2 {V}/{^}: “Ringer Setup” i M3 {V}/{^}: “Night Mode” i M4 {V}/{^}: “Ring Delay” i M5 {V}/{^}: Select the desired setting.i M i {ih}Note:L When the answering system answersthe call, this feature does not work.(KX-TG8421)Selecting categories to bypass nightmode1 1 (centre of joystick) i N iM2 {V}/{^}: “Ringer Setup” i M3 {V}/{^}: “Night Mode” i M4 {V}/{^}: “Select Category” iM5 Press the desired categorynumbers. i ML The selected category numberflashes.L To cancel a selected categorynumber, press the number again.The number stops flashing.6 {ih}Display modeYou can select to display either a singleitem or multiple items on one screen at atime for the following features:– menu list, phonebook list, caller list,redial list, and recorded message list– handset top menu icons in functionmenuSelect the desired setting:– “Multi Items”: Multiple entries/allmenu icons are shown on one screenat a time.– “Single Item”: An entry/a menuicon is shown on one screen in largecharacters at a time.The default setting is “Multi Items”.TG8411_8421BX(e).book Page 25 Tuesday, May 12, 2009 11:52 AM