Getting Started13– pressing {<} or {>} when on a call.– pressing {ic} at all other times.Turning the poweron/offPower onPress {ic} for about 1 second.Power offPress {ic} for about 2 seconds.Initial settingsDisplay language1 1 (centre of navigator key) i{#}{1}{1}{0}2 {V}/{^}: Select your desiredlanguage. i M i {ic}Date and time1 1 (centre of navigator key) i{#}{1}{0}{1}2 Enter the current date, month, andyear. i MExample: 15 July, 2010{1}{5} {0}{7} {1}{0}L You can select the date format bypressing {#}:– dd/mm/yy (date/month/year)– yy/mm/dd3 Enter the current hour and minute.Example: 9:30{0}{9} {3}{0}L You can select 24-hour or 12-hourclock format (“AM” or “PM”) bypressing /.4 M i {ic}Note:L To correct a digit, press {<} or {>} tomove the cursor to the digit, thenmake the correction.L The date and time may be incorrectafter a power failure. In this case, setthe date and time again.One touch eco modeThe {ECO/R} button on the handsetenables you to activate the eco functionwith one touch.By activating eco mode, your unit canreduce the base unit transmission powerby up to 90% in standby mode.You can turn on/off one touch eco modeby just pressing {ECO/R}. The defaultsetting is “Normal”.– When the one touch eco mode is on:“Low” is temporarily displayed andi is shown on the handset displayinstead of w.– When the one touch eco mode is off:“Normal” is temporarily displayedand i goes off from the handsetdisplay.Note:L When there is another cordless phonenearby and it is in use, the base unitSymbol meaning:Example: {V}/{^}: “Off”Press {V} or {^} to select the wordsin quotations.Important:L When the language selection isdisplayed after installing thebatteries for the first time, performstep 2.