Panasonic KX-TG8522AL Operating Instructions Manual

Panasonic KX-TG8522AL Operating Instructions Manual Manual pdf 15 page image

Making/Answering Calls15Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press ^.2 Press {C} or ].3 When you finish talking, press{ic} or place the handset on thebase unit or charger.Using the speakerphone1 Dial the phone number and press{s}.L Speak alternately with the otherparty.2 When you finish talking, press{ic}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly whiletalking.Making a call using the redial listThe last 10 phone numbers dialled arestored in the redial list (each 24 digitsmax.).1 j (right soft key) or {>} (R)2 {V}/{^}: Select the desired phonenumber.3 {C}/{s}L If {s} is pressed and the otherparty’s line is engaged, the unitautomatically redials multipletimes. While the handset iswaiting to redial, the ringerindicator flashes. To cancel,press {ic}.Erasing a number in the redial list1 j (right soft key) or {>} (R)2 {V}/{^}: Select the desired phonenumber. i W3 {V}/{^}: “Yes” i M i {ic}Pause (for PBX/long distance serviceusers)A pause is sometimes required whenmaking calls using a PBX or longdistance service. When storing a callingcard access number and/or PIN in thephonebook, a pause is also needed(page 19).Example: If you need to dial the lineaccess number “0” when making outsidecalls with a PBX:1 {0} i l2 Dial the phone number. i {C}Note:L A 3 second pause is inserted eachtime l is pressed. Repeat asneeded to create longer pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press {C} or{s} when the unit rings.L You can also answer the call bypressing any dial key from {0} to{9}, {*}, or {#}. (Any keyanswer feature)2 When you finish talking, press{ic} or place the handset on thebase unit or charger.