Panasonic KX-TG8621E Operating Instructions Manual

Contents

Intercom/Locator53Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 8333IntercomIntercom calls can be made betweenhandsets in the same radio cell.Note:L If you receive an outside call whiletalking on the intercom, you hear 2tones. To answer the call, press{ic}, then press {C}.L When paging the handset, the pagedhandset beeps for 1 minute.Making an intercom call1 1 (middle soft key) s 42 {r}: Select the desired unit. s ML To stop paging, press {ic}.3 When you finish talking, press{ic}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press{ic}.Turning auto intercom on/offThis feature allows the handset toanswer intercom calls automaticallywhen it is called. You do not need topress {C}. When this feature is set to“On”, the monitoring handset for thebaby monitor feature (page 34) will alsoanswer baby monitor calls automatically.The default setting is “Off”.1 1 (middle soft key) (2732 {r}: Select the desired setting. sM s {ic}Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit: Press {x}.L All registered handsets beep for 1minute.2 To stop paging:Base unit: Press {x}.Handset: Press {ic}.Transferring calls,conference callsOutside calls can be transferredbetween 2 handsets in the same radiocell.2 handsets in the same radio cell canhave a conference call with an outsideparty.1 During an outside call, press 4 toput the call on hold.2 {r}: Select the desired unit. s M3 Wait for the paged party to answer.L If the paged party does notanswer, press ^ to return to theoutside call.4 To complete the transfer:Press {ic}.L The outside call is being routed tothe destination unit.To establish a conference call:1 s {r}: “Conference” sML To leave the conference, press{ic}. The other 2 parties cancontinue the conversation.L To put the outside call on hold:1 s {r}: “Hold” s MTG862xE(e).book Page 53 Thursday, March 17, 2011 11:40 AM