Making/Answering Calls12Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press ^.2 Press {C} or ].3 When you finish talking, press{ic} or place the handset on thecharger.Using the speakerphone1 Dial the phone number and press{s}.L Speak alternately with the otherparty.2 When you finish talking, press{ic}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{s}/{C}.Adjusting the receiver or speakervolumePress {^} or {V} repeatedly whiletalking.Making a call using the redial listThe last 10 phone numbers dialled arestored in the redial list (each 24 digitsmax.).1 j (right soft key) or {>} (R)2 {r}: Select the desired phonenumber.3 {C}/{s}L If {s} is pressed and the otherparty’s line is engaged, the unitautomatically redials multipletimes. While the handset iswaiting to redial, the ringerindicator flashes. To cancel,press {ic}.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press {C} or{s} when the unit rings.L You can also answer the call bypressing any dial key from ) to9, *, or (. (Any key answerfeature)2 When you finish talking, press{ic} or place the handset on thecharger.Auto talkYou can answer calls simply by lifting thehandset off the charger. You do not needto press {C}. To turn this feature on,see page 28.Adjusting the handset ringer volume■ While the handset is ringing for anincoming call:Press {^} or {V} repeatedly to selectthe desired volume.■ Programming the volumebeforehand:1 1 (middle soft key) (16)2 {r}: Select the desired volume.3 M s {ic}Temporary handset ringer offWhile the handset is ringing for a call,you can turn the ringer off temporarily bypressing L.