Getting Started9Note when setting upNote for connectionsL The AC adaptor must remainconnected at all times. (It is normal forthe adaptor to feel warm during use.)L The AC adaptor should be connectedto a vertically oriented or floor-mounted AC outlet. Do not connectthe AC adaptor to a ceiling-mountedAC outlet, as the weight of the adaptormay cause it to become disconnected.Note for battery installationL Use the supplied rechargeablebatteries. For replacement, werecommend using the Panasonicrechargeable batteries noted on page4, 7.L Wipe the battery ends (S, T) with adry cloth.L Avoid touching the battery ends (S,T) or the unit contacts.Note for battery chargingL It is normal for the handset to feelwarm during charging.L Clean the charge contacts of thehandset and charger with a soft anddry cloth once a month. Clean moreoften if the unit is exposed to grease,dust, or high humidity.Battery levelPanasonic Ni-MH batteryperformance (supplied batteries)Note:L It is normal for batteries not to reachfull capacity at the initial charge.Maximum battery performance isreached after a few complete cycles ofcharge/discharge (use).L Actual battery performance dependson usage and ambient environment.L Even after the batteries are fullycharged, the handset can be left onthe charger without any ill effect on thebatteries.L The battery level may not bedisplayed correctly after you replacethe batteries. In this case, place thehandset on the charger and let itcharge for at least 7 hours.Icon Battery level& High( Medium) Low0)4 Needs charging.Operation Operating timeIn continuoususe12 hours max.Not in use(standby)140 hours max.L The unit is not designed to be used withrotary/pulse dialling services.LDuring a power failureThe unit will not work during a powerfailure. We recommend connecting acorded-type telephone (without ACadaptor) to the same telephone line or tothe same telephone line socket using