Panasonic KX-TG9381 Operating Instructions Manual

Also see for KX-TGA939: Operating instructions Installation manual Installation manual

Contents

Making/Answering Calls19For assistance, please visit http://www.panasonic.com/help1 {9} i {PAUSE}2 Dial the phone number.3 Proceed with the operation for your unit.Handset: {C}Base unit: {SP-PHONE}Note:L A 3.5 second pause is inserted each time{PAUSE} is pressed. Repeat as needed tocreate longer pauses.Answering callsUsing the handset YWhen a call is being received, the ringer indicatorand c and/or d flash rapidly.1 Lift the handset and press {C} or {s} whenthe unit rings.L The called line is automatically selected. Tochange the line selection mode, see page17.L You can also answer the call by pressing{LINE 1} or {LINE 2}.L You can also answer the call by pressingany dial key from {0} to {9}, {*}, or {#}.(Any key answer feature)2 When you finish talking, press {OFF} or placethe handset on the base unit or charger.Auto talkYou can answer calls simply by lifting the handsetoff the base unit or charger. You do not need topress {C}. To turn this feature on, see page 29.Adjusting the handset ringer volume■ While the handset is ringing for an incomingcall:Press {^} or {V} repeatedly to select the desiredvolume.■ Programming the volume beforehand:1 {MENU} i {#}{1}{6}{0}2 {V}/{^}: Select the desired line(s). i{SELECT}3 {V}/{^}: Select the desired volume.4 {SAVE} i {OFF}Temporary handset ringer offWhile the handset is ringing for a call, you can turnthe ringer off temporarily by pressing {OFF}.Using the base unit [When a call is being received, the LINE1 indicatorand/or LINE2 indicator on the base unit flashesrapidly.1 Press {SP-PHONE} when the unit rings.L The called line is automatically selected. Tochange the line selection mode, see page17.L You can also answer the call by pressing{LINE 1} or {LINE 2}.2 Speak into the MIC.3 When you finish talking, press {SP-PHONE}.Adjusting the base unit ringer volume■ While the base unit is ringing for anincoming call:Press {^} or {V} repeatedly to select the desiredvolume.■ Programming the volume beforehand:1 {MENU} i {#}{1}{6}{0}2 {V}/{^}: Select the desired line(s). i{SELECT}3 {V}/{^}: Select the desired volume.4 {SAVE} i {■} (EXIT)Temporary base unit ringer offWhile the base unit is ringing for a call, you canturn the ringer off temporarily by pressing {~}.