Panasonic KX-TGD390C Operating Instructions Manual

*2 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID auto”. To turn this feature off, select“Manual”. (Caller ID subscribers only)To use this feature, set the date and time first (page 10).*3 The preset melodies in this product (“Tone 3” - “Tone 5”, “Melody 1” - “Melody 10”)are used with permission of © 2012 Copyrights Vision Inc.*4 Generally, the line mode setting should not be changed. This setting automatically maintainsreceiver volume at the proper level depending on the current telephone line condition. Setthe line mode to “A” if telephone line condition is not good.AlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.1 MMENUN#7202 MbN: Select the desired alarm option. aMSELECTN3 Enter the desired month and date. aMOKN4 Set the desired time.5 *: Select “AM” or “PM”. a MOKN6 MbN: Select the desired alarm tone. aMSELECTN7 MSELECTN a MOFFNNight modeNight mode allows you to select a period oftime during which the handset will not ring foroutside calls. This feature is useful for timeperiods when you do not want to be disturbed,for example, while sleeping. Night mode canbe set for each unit.Important:R If you have set the alarm, the alarm soundseven if the night mode is turned on.Turning night mode on/off1 MMENUN#2382 MbN: Select the desired setting. aMSAVEN3 Follow the directions on the display tocomplete the operation.Changing the start and end time1 MMENUN#2372 Follow the directions on the display tocomplete the operation.Call blockThis feature allows the unit to block calls when:– the unit receives a call from a phonenumber stored in the call block list asunwanted (“Storing unwanted callers”,page 21).– the unit receives a call without phonenumber (“Blocking incoming calls that haveno phone number”, page 21).When a call is received, the unit rings once*1while caller information is being received. Ifthe caller’s phone number matches an entry inthe call block list, the unit emits no sound tothe caller, and disconnects the call. (Caller IDsubscribers only)*1 This is called first ring. If you do not wantthe first ring to sound, turn this setting to“Off” (page 21).Important:R Blocked calls are logged in the caller list.20 For assistance, visit www.panasonic.ca/english/supportProgrammingTGD39xC_(en)_ver021.pdf 20 2016/01/25 15:56:51