Panasonic KX-TGD510 Operating Instructions Manual

Also see for KX-TG3712: Operating instructions

Call blockYou can press the MCALL BLOCKN button inthe following situations to disconnect thecurrent call and add a phone number to thecall block list:– when an incoming call is being received– when an incoming call is being recorded bythe answering system*1– when talking on an outside call*1 KX-TGD530 seriesOnce a phone number has been added to thecall block list, the unit will block calls from thatphone number in the future.1 Press MCALL BLOCKN under thesituations shown above.2 Confirm the call block number and pressMYESN.R The call block number is stored in thecall block list, “Caller blocked” isdisplayed, and then the call isdisconnected.Note:R If the call has no phone number, the call isblocked but it is not stored in the call blocklist.R The call block feature is not available forintercom calls or calls received by callwaiting.R Blocked calls are logged in the caller list.Storing unwanted callersThe unit can block calls by storing the desireditems in the call block list beforehand (CallerID subscribers only).– “Block a single number”: The unitblocks calls from specific phone numbersstored in the call block list.– “Block range of numbers”: The unitblocks calls that begin with a number storedin the call block list, such as a toll-freephone number prefix or certain area codes.– “Block unknown CID”: The unit blockscalls that have no phone number.Single phone numbers and ranges of numberscan be stored in the call block list up to 150items in total.Blocking unwanted callers:When a call is received, the unit rings once*1while caller information is being received.If the caller’s phone number matches an entryin the call block list, the unit emits no sound tothe caller, and disconnects the call.*1 If you do not want this one ring to sound,select “No” in “Turning the first ring on/off” (page 16).Storing a single phone numberImportant:R We recommend storing 10 digits (includingthe area code). If only 7 digits are stored, allnumbers that have the same last 7 digitswill be blocked.Adding call blocked numbers fromthe caller list1 MCN CID2 MbN: Select the desired entry to beblocked.R To edit the number: MMENUN a MbN:“Edit” a MSELECTNPress MEDITN repeatedly until thephone number is shown in the 10-digitformat. a MSAVEN a MbN: “Callblock” a MSELECTN a Go to step4.3 MCALL BLOCKN4 MbN: “Yes” a MSELECTN5 Edit the phone number if necessary (24digits max.). a MSAVEN a MOFFNAdding call blocked numbersmanually1 MCALL BLOCKN2 MbN: “Block a single number” aMSELECTN3 MMENUN a MbN: “Add” a MSELECTNFor assistance, please visit http://shop.panasonic.com/support 15Call BlockTGD51x_OI(en)_1129_ver031.pdf 15 2016/11/29 10:57:37