Panasonic KX-TGE260 Operating Instructions Manual

Also see for KX-TG454SK: Quick guide Operating instructions Service manual Service manual Quick guide

Contents

Panasonic KX-TGE260 Operating Instructions Manual Manual pdf 20 page image

Important:R When 3 Bluetooth devices (2 cellularphones and 1 headset) are paired to thebase unit, only 2 Bluetooth devices can beused with the unit at the same time, and thebase unit loses its connection from otherBluetooth devices. To automatically resumethe connection to Bluetooth devices, leavethe auto connection on.R Some cellular phones lose connection afterusage, please check the specifications ofyour cellular phone for more details.1 MMENUN#6322 MbN: Select the desired setting.3 MSAVEN a MOFFNNote:R Some cellular phones may ask you if youaccept the connection requirement from thebase unit. In that case, select “Off” in step2. Check the specifications of your cellularphone.Connecting/disconnecting thecellular phone manuallyIf you will not be using the paired cellularphone’s link to cell feature temporarily (forexample, you do not want the unit to ringwhen your cellular line receives a call), youcan disconnect your cellular phone from thebase unit. If you want to use it again,reconnect the cellular phone to the base unit.Note:R Even if a paired cellular phone wasdisconnected from the base unit, if it isbrought within the base unit’s range duringthe auto connection interval, it mayautomatically connect to the base unit(page 19).R A disconnected cellular phone is notunpaired from the base unit, so pairing it tothe base unit again is unnecessary.1 To connect/disconnect:For CELL 1: MMENUN#6251For CELL 2: MMENUN#6252R A long beep sounds.2 MOFFNCellular line only mode (If you donot use the landline)If you do not use the landline, we recommendsetting the unit to the cellular line only mode.Important:R If you turn on the “Cell line onlymode”, disconnect the telephone line cordfrom the base unit. Otherwise the “Cellline only mode” cannot be activated.1 MMENUN#1572 To turn on:MbN: “On” a MSELECTN aMbN: “Yes” a MSELECTNTo turn off:MbN: “Off” a MSELECTNNote:R Once you set this mode, you can use thefollowing buttons to make cellular calls:– for the handset, press M N or MZNinstead of MCELLN (page 22).– for the base unit, press MZN instead ofthe line button (MCELL 1N or MCELL 2N)set for the cellular line selection(page 21, 28). (KX-TGE270 series:page 3)R Once you set this mode, the followingfeatures cannot be used:– Landline features (page 44)– Answering system (page 56)Messages cannot be received.– Voice mail features (page 63)R After this mode is turned on or off, the baseunit reboots.– Bluetooth connections from cellularphones or headset are disconnected. Ifthe auto connection is turned on(page 19), the cellular phones arereconnected.– will be displayed on the handsetmomentarily. The handset can be usedonce is displayed.When you use the landline againBefore connecting the telephone line to thebase unit, select “Off” in step 2, “Cellular line20 For assistance, please visit http://www.panasonic.com/helpLink to Cell