“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired month and date. aMOKNn Weekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5 Set the desired time.6 *: Select “AM” or “PM”. a MOKN7 Enter a text memo (10 characters max.).a MOKN8 MbN: Select the desired alarm tone. aMSELECTNR We recommend selecting a differentringer tone from the one used foroutside calls.9 MbN: Select the desired snooze setting.a MSAVEN10 MSELECTN a MOFFNNote:R Press MSTOPN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key, M N, or MSNOOZEN tostop the sound but keep the snoozefunction activated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.Silent modeSilent mode allows you to select a period oftime during which the handset and/or baseunit will not ring for outside calls. This featureis useful for time periods when you do notwant to be disturbed, for example, whilesleeping. Silent mode can be set for each unit.Using the phonebook’s group feature(page 34), you can also select groups ofcallers whose calls override silent mode andring the handset (Caller ID subscribers only).Important:R Make sure the unit’s date and time settingis correct (page 16).R We recommend turning the base unit ringeroff (page 39, 41) in addition to turning thesilent mode on. (KX-TGE260 series: page 3)R If you have set the alarm, the alarm soundseven if the silent mode is turned on.Turning silent mode on/off1 For handset setting: MMENUN#238For base unit setting (using ahandset)*1: MMENUN#*2382 MbN: Select the desired setting. aMSAVENR If you select “Off”, press MOFFN toexit.3 Enter the desired hour and minute youwish to start this feature.4 *: Select “AM” or “PM”. a MOKN5 Enter the desired hour and minute youwish to end this feature.6 *: Select “AM” or “PM”.7 MSAVEN a MOFFN*1 KX-TGE270 series: page 3Changing the start and end time1 For handset setting: MMENUN#237For base unit setting (using ahandset)*1: MMENUN#*2372 Continue from step 3, “Turning silentmode on/off”, page 45.*1 KX-TGE270 series: page 3Selecting groups to bypass silentmode1 For handset setting: MMENUN#241For base unit setting (using ahandset)*1: MMENUN#*2412 Select your desired groups by pressing1 to 9.R “ ” is displayed next to the selectedgroup numbers.For assistance, please visit http://www.panasonic.com/help 45Programming