R Text message alerts are not logged in thecaller list of your unit.Using a Bluetooth wirelessheadset (optional) forlandline callsBy pairing a Bluetooth headset to the baseunit, you can have a hands-free conversationwirelessly for landline calls.Important:R Your Bluetooth wireless headset mustsupport the HeadSet Profile (HSP)specification.R 1 headset can be paired to the base unit.R Only 2 Bluetooth devices can be used withthe unit at the same time (for example, 2cellular lines, or the headset and 1 cellularline).R For best performance, we recommendusing a Bluetooth headset within 1 m(3.3 feet) of the base unit. A headset cancommunicate with the base unit within arange of approximately 10 m (33 feet).Pairing a headset to the base unitImportant:R Make sure that the Bluetooth headset is notconnected to any other Bluetooth device.1 Your headset:Set your headset to pairing mode.R Refer to the headset operatinginstructions.2 Handset:MMENUN#6213 If your headset PIN is “0000”, go tostep 4.If your headset PIN is other than“0000”, press MCLEARN, then enter yourheadset PIN.R Typically, default PIN is “0000”. Referto the headset operating instructions.4 Press MOKN, then wait until a long beepsounds.5 MOFFNR When the HEADSET indicator on thebase unit lights up, you are ready touse the headset.Connecting/disconnecting a headsetIf you cannot connect the headset and baseunit using the headset, you can connect usingthe handset.To use your headset with another Bluetoothdevice such as a cellular phone, you mayneed to disconnect it from the base unit.Important:R Make sure that the headset is turned on.1 To connect/disconnect:MMENUN#622R A long beep sounds.2 MOFFNUnpairing a headsetYou can cancel a pairing of the headset that isstored to the base unit.1 MMENUN#6122 MbN: “Yes” a MSELECTNR When the headset is unpaired, theHEADSET indicator is turned off.3 MOFFNOperating a Bluetooth wirelessheadset using a landlineImportant:R Refer to your headset operating instructionsfor headset operations.Answering landline calls with yourheadsetTo answer a landline call, turn on yourheadset referring to your headset operatinginstructions.When you finish talking, turn off your headsetreferring to your headset operatinginstructions.54 For assistance, please visit http://www.panasonic.com/helpUsing Bluetooth Devices