Panasonic KX-TGH223AZ Operating Instructions Manual

Also see for KX-TGH222AZ: Operating instructions Operating instructions

Panasonic KX-TGH223AZ Operating Instructions Manual Manual pdf 29 page image

*1 If you program these settings using one of the handsets, you do not need to program thesame item using another handset.*2 This menu is not displayed when scrolling through the display menus. It is only available indirect command code.*3 This setting is available when you have the key finder (KX-TGA20AZ). Read the installationmanual for more information on the key finder.*4 This menu icon is displayed when the key finder is not registered.*5 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used withpermission of © 2012 Copyrights Vision Inc.*6 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings 2 times or more by default, which dependson your service provider/telephone company.*7 This feature allows the unit to automatically adjust the date and time each time callerinformation including date and time is received.To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.(Caller ID subscribers only)To use this feature, set the date and time first (page 14).*8 For models with supplied key finders, the display shows “1:Finder1”.*9 If you register 2 or more key finders.*10 If you have 2 or more key finders.*11 This menu is not displayed when repeater mode is set to “On”.*12 You can select to display either a single item or multiple items on one screen at a time forthe handset menu list, recorded message list, phonebook list, caller list, and redial list. Whenin multiple items display mode, you can switch the screen to confirm the detailed informationby:– pressing MDETAILN, or– pressing MMENUN a MbN: “Detail” a MOKN*13 You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging.*14 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*15 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.You can access your service provider/telephone company “call waiting” service by havingthe recall/flash time set at “100 msec.”, and then follow your service provider/telephonecompany “call waiting” instructions to operate this service. (for Australia)*16 The default setting will be as follows if you select the following regional codes whenchanging the unit’s region setting (page 35):“NewZealand” = “600 msec.”*17 To prevent other users from joining your conversations with outside callers, turn this featureon.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 5 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.29ProgrammingTGH222_23AZ(en)_0109_ve001.pdf 29 1/9/2014 10:49:40 AM