Setting the ring delayThis setting allows the handset to ring duringdo not disturb mode if the caller waits longenough. After the selected amount of timepasses, the handset rings. If you select “NoRinging”, the handset never rings during donot disturb mode.1 MMENUN (right soft key) #2392 MbN: Select the desired setting. a MOKNa M NNote:R When the answering system answers thecall, this feature does not work.Selecting categories to bypass donot disturb mode1 MMENUN (right soft key) #2412 Select your desired categories bypressing 1 to 9.R “ ” is displayed next to the selectedcategory numbers.R To cancel a selected category, pressthe same dial key again. “ ”disappears.3 MOKN a M NNuisance call blockThis feature rejects calls from unwantedcallers (Caller ID subscribers only). Thefollowing items are available when storingphone numbers in the call block list (50 max.).– “Single Number”: The unit can rejectcalls from specific phone numbers.– “Range of Numbers”: The unit canreject calls that begin with a number storedin the call block list, such as a toll-freephone number prefix or certain area codes.When a call is received, the unit does not ringwhile the caller is being identified. If thecaller’s phone number matches an entry in thecall block list, the unit emits no sound to thecaller, and disconnects the call.Important:R Rejected calls are logged in the caller list.Storing unwanted callersStoring a single phone numberImportant:R You must include the area code whenstoring phone numbers in the call block list.n From the caller list:1 M N2 MbN: Select the entry to be blocked. aMMENUN3 MbN: “Save Caller ID” a MOKN4 MbN: “Nuisance Call Block” a MOKN5 MbN: “Yes” a MOKN a M Nn By entering phone numbers:1 MMENUN (right soft key) #2172 MbN: “Single Number” a MOKN3 MMENUN a MbN: “Add” a MOKN4 Enter the phone number (24 digits max.).R To erase a digit, press MCLEARN.5 MOKN a M NStoring a range of numbers1 MMENUN (right soft key) #2172 MbN: “Range of Numbers” a MOKN3 MMENUN a MbN: “Add” a MOKN4 Enter the desired number (2-8 digits).R To erase a digit, press MCLEARN.5 MOKN a M NViewing/editing/erasing callblock numbers1 MMENUN (right soft key) #2172 MbN: “Single Number” or “Range ofNumbers” a MOKN3 MbN: Select the desired entry.R To exit, press M N.4 To edit a number:MEDITN a Edit the number. a MOKN aM NTo erase a number:31ProgrammingTGH222_23AZ(en)_0109_ve001.pdf 31 1/9/2014 10:49:40 AM