– pressing MDETAILN, or– pressing MMENUN a MbN: “Detail” a MOKN*11 You can set the handset display backlight while on charge.– “On”: Backlight is on (dimmed).– “Off”: Backlight turns off after 10 seconds of charging.*12 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*13 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*14 To prevent other users from joining your conversations with outside callers, turn this featureon.*15 This menu icon is displayed when the key finder is not registered.AlarmAn alarm sounds at the set time for 1 minuteand is repeated 5 times at 5 minute intervals(snooze function). A text memo can also bedisplayed for the alarm. A total of 5 separatealarm times can be programmed for eachhandset. You can set one of 3 different alarmoptions (once, daily, or weekly) for each alarmtime.Important:R Make sure the unit’s date and time settingis correct (page 15).1 MMENUN (right soft key) #7202 MbN: Select the desired alarm. a MOKN3 MbN: Select the desired alarm option. aMOKN“Off”Turns alarm off. Go to step 9.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 5.“Weekly”Alarm sounds weekly at the set time(s).4 Proceed with the operation according toyour selection in step 3.n Once:Enter the desired date and month. aMOKNn Weekly:MbN: Select the desired day of the weekand press MSELECTN. a MOKN5 Set the desired time. a MOKN6 Enter a text memo (30 characters max.).a MOKN7 MbN: Select the desired alarm tone. aMOKNR We recommend selecting a differentringer tone from the one used foroutside calls.8 MbN: Select the desired snooze setting.a MOKN9 MOKN a MOFFNNote:R Press MSTOPN to stop the alarm completely.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.R Press any dial key or MSNOOZEN to stopthe sound but keep the snooze functionactivated.R If you want to make an outside call whenthe snooze function is activated, pleasestop the snooze function before making thecall.30 Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333ProgrammingTGJ32xE(en)_0305_ver011.pdf 30 2015/03/05 14:31:40