Panasonic KX-TGJ322E Operating Instructions Manual

Also see for KX-TGJ320E: Operating instructions

Panasonic KX-TGJ322E Operating Instructions Manual Manual pdf 31 page image

Do not disturb modeDo not disturb mode allows you to select aperiod of time during which the handset willnot ring for outside calls. This feature is usefulfor time periods when you do not want to bedisturbed, for example, while sleeping. Do notdisturb mode can be set for each handset.Using the phonebook’s category feature(page 20), you can also select categories ofcallers whose calls override do not disturbmode and ring the handset (Caller IDsubscribers only).Important:R Make sure the unit’s date and time settingis correct (page 15).R We recommend turning the base unit ringeroff (page 26) in addition to turning do notdisturb mode on.R If you have set the alarm, the alarm soundseven if do not disturb mode is turned on.Turning do not disturb mode on/off1 MMENUN (right soft key) #2382 MbN: Select the desired setting. a MOKNR If you select “Off”, press MOFFN toexit.3 Enter the desired hour and minute youwish to start this feature. a MOKN4 Enter the desired hour and minute youwish to end this feature. a MOKN aMOFFNChanging the start and end time1 MMENUN (right soft key) #2372 Continue from step 3, “Turning do notdisturb mode on/off”, page 31.Setting the ring delayThis setting allows the handset to ring duringdo not disturb mode if the caller waits longenough. After the selected amount of timepasses, the handset rings. If you select “NoRinging”, the handset never rings during donot disturb mode.1 MMENUN (right soft key) #2392 MbN: Select the desired setting. a MOKNa MOFFNNote:R When the answering system answers thecall, this feature does not work.Selecting categories to bypass donot disturb mode1 MMENUN (right soft key) #2412 MbN: Select the desired categories. aMSELECTNR “ ” is displayed next to the selectedcategory numbers.R To cancel the selected category:MbN: Select the category. a PressMSELECTN again. “ ” disappears.3 MOKN a MOFFNNuisance call blockThis feature blocks calls from unwantedcallers (Caller ID subscribers only). Thefollowing items are available when storingphone numbers in the call block list (100 max.).– “Single Number”: The unit blocks callsfrom specific phone numbers.– “Range of Numbers”: The unit blockscalls that begin with a number stored in thecall block list, such as a toll-free phonenumber prefix or certain area codes.You can also set the unit to block calls thathave no phone number.When a call is received, the unit does not ringwhile the caller is being identified. If thecaller’s phone number matches an entry in thecall block list, the unit emits no sound to thecaller, and disconnects the call.Important:R Blocked calls are logged in the caller list.Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 31ProgrammingTGJ32xE(en)_0305_ver011.pdf 31 2015/03/05 14:31:40