C Making/Answering Calls30 For assistance, please visit http://www.panasonic.com/phonehelpMaking callsUsing the handset Y1 Lift the handset and dial the phonenumber.L To correct a digit, press {CLEAR}.2 {C}L An available line is automaticallyselected and the line number isdisplayed.3 When you finish talking, press {OFF}.Note:L You can also select a line by pressing{LINE1} or {LINE2} in step 2. Thespeakerphone is activated.L To change the line selection, see page74.Using the speakerphoneImportant:L You can place the handset on thecharger while using the speakerphone.The call is not disconnected.1 During a conversation, press {s} toturn on the speakerphone.L Speak alternately with the other party.2 When you finish talking, press {OFF}.Note:L Use the speakerphone in a quietenvironment.L To switch back to the receiver, press{C}.Adjusting the receiver/speaker volumePress {^} or {V} while talking.Making a call using the redial listThe last 10 phone numbers dialed arestored in the redial list.1 {REDIAL}2 Press {^} or {V} to select the desirednumber.L To erase the displayed number, press{CLEAR}.3 {C}PAUSE button (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or long distanceservice.For example, if you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 {9} i {PAUSE} i Dial the phonenumber.2 {C}Note:L A 3.5 second pause is inserted eachtime {PAUSE} is pressed. Pressrepeatedly to insert longer pauses.