Panasonic KX-TH102M Operating Instructions Manual

Also see for KX-TH102M: Quick guide

Contents

Using a Cellular Phone with this UnitFor assistance, please visit http://www.panasonic.com/phonehelp 91Ringer toneYou can change the ringer tone heardwhen a cellular call is received. You canchange it for the handset and base unitindividually.1 {MENU} (F2) i s i {SELECT}2 “Ringer for cell” i {SELECT}3 “Ringer tone” i {SELECT}4 Select the desired item. (Default: “Tone3”) i {SAVE} i {OFF}Note:L If you erase a customized ring forcellular call, “Tone 3” (default) is usedinstead of that ringer tone.1 {CELLULAR}2 “Cellular setting” i {SET}3 “Ringer tone” i {SET}4 Select the desired item. (Default: “Tone3”) i {SET} i {STOP}Selecting which unit to ring oYou can select which handset or base unitrings when you receive a call from one ofthe registered cellular phones.1 {CELLULAR}2 “Cellular setting” i {SET}3 “Assign Base/HS” i {SET}4 Select the desired cellular phone. i{SET}5 Select the desired unit, then press {>}.(Default: “All”)L The selected units are indicated by“Q”.L To cancel a selected unit, press {>}again.6 {SET} i {STOP}Answering system settings forcellular calls oSetting the answering system for acellular callThis feature allows the base unit to answercellular calls when you are not available toanswer cellular calls.Important:L To use this feature, you need to turn onthe answering system for line 1 and/orline 2 (page 79).L If this feature is turned on, the base unitplays the greeting message for line 1and message is recorded on line 1.1 {CELLULAR}2 “Cellular setting” i {SET}3 “TAD (cell)” i {SET}4 Select the desired setting. (Default:“Off”) i {SET} i {STOP}Note:L “TAD” stands for Telephone AnsweringDevice.Ring countYou can change the number of times thecellular phone rings before the base unitanswers cellular calls.1 {CELLULAR}2 “Cellular setting” i {SET}3 “TAD ring count” i {SET}4 Select the desired number. (Default:“4”) i {SET} i {STOP}HandsetBase unit