Using a Cellular Phone with this UnitFor assistance, please visit http://www.panasonic.com/phonehelp 41Viewing the caller list andcalling backIf you receive a call via cellular line, callerinformation is logged in the caller list withy.1 {MENU} (center of joystick) i Gi {SELECT}2 Push {^} or {V} to select the desiredcaller information indicated by y.3 {CALL} i {CELL}L If you registered only one cellularphone, skip to step 5.4 Select the desired cellular phone. i{SELECT}5 When you finish talking, press {OFF}.Note:L If the cellular line is already being usedor you want to select the land line, selectthe desired line by pressing {LINE1} or{LINE2} instead of {CELL}.Putting a cellular call on holdPress {HOLD} 2 times during a cellularcall.L To return to the call, press {C}.Note:L If a call is kept on hold for more than 6minutes, an alarm tone starts to sound.After 4 additional minutes on hold, thecall is disconnected.Using the land line during acellular callHolding a cellular call to make oranswer a land line callExample: If you are on a cellular line call1 To put the cellular call on hold, press{HOLD} 2 times.2 To make a land line call, dial the phonenumber, then press {LINE1} or{LINE2}.To answer a land line call, press{LINE1} or {LINE2}.3 When you finish talking, press {OFF} toend the land line call.4 To return to the cellular call, press{C}.Holding a land line call and make oranswer a cellular callExample: If you are on a land line call1 To put the land line call on hold, press{HOLD} 2 times.2 To make a cellular call– If you have registered only onecellular phone, dial the phonenumber, then press {CELL}.– If you have registered more than onecellular phone, dial the phonenumber, then press {CELL}. Selectthe desired cellular phone, then press{SELECT}.To answer a cellular callPress {CELL}.3 To return to the land line call, press theline button that is flashing on thehandset.L The cellular call ends.