PQQX13969ZA F1003-0 DManufactured by PanasonicCommunications (Malaysia) Sdn. Bhd.Senai MalaysiaFor your future referenceSerial No.(found on the bottom of the unit)Date of purchaseName and address of dealerIntegrated Telephone SystemOperating InstructionsModel No. KX-TS500HGPulse-or-tone dialing capabilityPLEASE READ BEFORE USE AND SAVE.KX-TS500HGWThis equipment is designed for use onHungary only.In the event of problems, you should contactyour equipment supplier in the first instance.1999/5/EC1 Getting Started1-A Location of controls 1-B Settings2ABC 3DEF15JKL 6MNO4GHI8TUV 9WXYZ7PQRS0TONE($) Button (3-B) (R) Button(3-A)RINGER Selector(1-B)Button (2-A)DIALING MODE Selector(1-B)VOLUME (^), (_)Buttons (2-A)R1 Connect the telephone line cord (1).2 Connect the handset cord (2), then confirmthe dial tone.To Single-LineTelephone JackHandset CordHandsetTelephone Line CordRINGER SelectorDIALING MODESelector12TONE PULSEDIALING MODEHIGH OFFRINGER3 Set the DIALING MODE selector to TONE.≥If you cannot dial, set to PULSE.4 Set the RINGER selector to HIGH, LOW orOFF.(Ex. “LOW” is selected.)∑ Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . one∑ Handset Cord . . . . . . . . . . . . . . . . . . . . . . . . . one∑ Telephone Line Cord . . . . . . . . . . . . . . . . . . . oneAccessories (included)≥When set to OFF, the unit will not ring.2 Operation2-A Making Calls1 Lift the handset.2 Dial a phone number.≥If you misdial, hang up and start again fromstep 1.3 When finished talking, hang up.To redial the last number dialedLift the handset. ➡ Press .To adjust the receiver volume (6 levels)while talkingTo increase, press (^).To decrease, press (_).≥After hanging up, the volume level will be saved.(\\\)4 Things You Should Know “ Things You Should Know3 Special Features3-A Recall ButtonPressing (R) allows you to use special featuresof your host PBX such as transferring anextension call or accessing special telephoneservices (optional) such as call waiting.2-B Answering Calls1 When the unit rings, lift the handset.2 When finished talking, hang up.3-B Temporary Tone Dialing(For Rotary or Pulse Service Users)Press ($) before entering access numberswhich require tone dialing.≥The dialing mode changes to tone. You can enternumbers to access answering services, electronicbanking services, etc. When you hang up, themode will return to pulse.≥Access numbers entered after pressing ($) will notbe included when redialing.4-A Wall MountingTo Single-LineTelephone JackScrews8.3 cmHooksThe unit can be mounted on a wall.1 Press the tabs in the direction of the arrows(1), then remove the wall mounting adaptor(2).3 Install screws using the wall template below.Connect the telephone line cord. Mount theunit, then slide down.≥Fasten the cord to prevent it from beingdisconnected.1122 Tuck the telephone line cord inside the wallmounting adaptor, and push it in the directionof the arrow (1 and 2).≥The word “UP WALL” should face upward.12