2 Feature ManualIntroductionAbout this ManualThis Feature Manual is designed to serve as an overall reference describing the features of thePanasonic Voice Processing System. It explains what this VPS can do, and how to obtain the mostof its many features.The Feature Manual is divided into the following sections:Section 1, Voice Processing System OverviewProvides an introduction to the Voice Processing System.Section 2, FeaturesDescribes the PBX integration features, system features, subscribers features, and system settingfeatures.GlossaryAn alphabetical listing of features, terms, and abbreviations, as well as their definitions.IndexAn alphabetical listing of features and terms, as well as the page numbers of related sections.About the Other ManualsInstallation ManualThe Voice Processing System Installation Manual provides instructions for installing the VPShardware, configuring the connected PBX for use with the VPS, and getting started with the KX-TVAMaintenance Console software. Relevant sections from the Installation Manual are listed throughoutthis manual for your reference.Programming ManualThe Voice Processing System Programming Manual is an overall reference for programming the VPSusing KX-TVA Maintenance Console. It explains how to use KX-TVA Maintenance Console andobtain the most out of system administration. Sections from the Programming Manual are listedthroughout this manual for your reference.Subscriber's ManualThe Voice Processing System Subscriber's Manual describes how subscribers can accesscommonly used VPS features and functions with their extensions and mailboxes. Relevant sectionsfrom the Subscriber's Manual are listed throughout this manual for your reference.Note• This manual may refer to products not available in your country/area.• For KX-TD500, KX-TDA series PBXs, the term "trunk (CO line)" used in this manual indicates atrunk (CO line) group.• Depending on the model and/or the software version of the connected PBX, you may not be ableto utilize some of APT/DPT Integration features described in this manual. For more information,call National Parts Center at 1-800-833-9626.