3.2 Message Manager's Guide100 Feature Manual3.2.7 Remote Call Forwarding SetThe Message Manager can programme his or her extension from a remote location to forward varioustypes of calls to the desired extension or an outside telephone. There are 6 forwarding settingsavailable:• FWD All—Forwards all incoming calls to a specified extension number.• FWD Busy—Forwards all incoming calls to a specified extension number when the line is busy.• FWD No Answer—Forwards all incoming calls to a specified extension number when there is noanswer.• FWD Busy or No Answer—Forwards all incoming calls to a specified extension number when theline is busy or there is no answer.• FWD to CO—Forwards all incoming calls to telephone number 1 or 2 (preprogrammed in theMailbox Setting), or to any other telephone number.• FWD Cancel—Cancels the forwarding setting.Note• The Remote Call Forwarding Set feature is only available when the VPS is connected to aPanasonic KX-T series PBX using DPT Integration.• By default, the extension number for the Message Manager's extension (assigned forOperator 1 in the Day Mode) is "0". However, the default setting cannot be used with thisfeature.• FWD to CO must be enabled for the Class of Service (COS) assigned to the MessageManager (see "Remote Call Forward to CO" in 2.2.2 Personal Options in ProgrammingManual).• FWD to CO must also be enabled in the COS setting in the PBX for the Message Manager.Assigning Remote Call Forwarding Set1. Log in to the Main Menu.2. Press [6] to set Remote Call Forwarding.3. Press [1], [2], [3], [4], [5], or [6] to select the desired forwarding setting.• [1] FWD All• [2] FWD Busy• [3] FWD No Answer• [4] FWD Busy or No Answer• [5] FWD to CO—Go to Step 6.• [6] FWD Cancel—Go to Step 9.
