Panasonic KX-TVM50 Getting Started

Also see for KX-NCV200: Brochure & specs Brochure Getting started guide Programming manual Installation manual

Panasonic KX-TVM50 Getting Started Manual pdf 22 page image

2.13 Initialising the VPS During Installation22 Getting Started2.13 Initialising the VPS During InstallationBefore programming the VPS for the first time, perform the initialisation procedure described below.All settings are reset to their default values. Recorded messages are erased. System Prompts(including customised prompts) are preserved.1. Turn the power switch to the off position.2. Set the Mode Switch to position 5 (see 1.2 Names and Locations).• The black area in the switch illustration indicates the direction of the switch.3. Turn the power switch to the on position.4. Confirm that the Run Indicator blinks 5 times.• This may take several minutes. The Alarm Indicator and Run Indicator will first blinkintermittently before the Run Indicator blinks 5 times.5. Turn the power switch off at the VPS.6. Set the Mode Switch to position 0.• The black area in the switch illustration indicates the direction of the switch.7. Turn the power switch back on at the VPS.CAUTIONIf the Mode Switch is not set to position 0, all programming will be lost when the power is switchedoff!After initialising the VPS, continue with the installation procedure and/or begin programming the VPS.