Panasonic KX-TVM50 Getting Started

Also see for KX-TVM200: Programming manual Getting started Installation manual Operating instructions Feature manual

Panasonic KX-TVM50 Getting Started Manual pdf 48 page image

4.4 LAN SettingsTo program the VPS over a LAN connection or to use E-mail Integration features, the VPS must first beconnected to the LAN and programmed accordingly.Programming the VPS for LAN access1. Connect the PC to the VPS via USB (refer to 2.9 Connecting the VPS to a PC or LAN).2. Start KX-TVM Maintenance Console and connect to the VPS via USB (refer to 4.2 Starting KX-TVMMaintenance Console).3. Click Utility in the menu bar.4. Select LAN Settings.5. Select "Obtain an IP address automatically", or select "Use the following IP address:" and specify the IPaddress, subnet mask, and default gateway.6. Select "Obtain DNS server address automatically", or select "Use the following DNS server addresses:"and specify the preferred and alternate DNS server addresses.7. To change the port number used for accessing the VPS over the LAN, click Advanced Settings, specifythe port number, then click OK, otherwise click OK to close the LAN Settings dialogue box.Note• The port number setting is used for both LAN and modem connections to the VPS.• Consult the LAN administrator for the appropriate settings.• The VPS must be restarted after these settings are changed in order for them to take effect.Accessing the VPS over the LAN1. Start KX-TVM Maintenance Console.2. From the Connect menu, select LAN (TCP/IP).3. Enter the IP address, port number, and password used to connect to the VPS.4. Click Next, then click Finish when the connection is completed.48 Getting Started Document Version 2.1 2008/044.4 LAN Settings