1.2 Installing and Starting KX-TVM/NCV Maintenance Console12 Programming Manual1.2.2 Starting KX-TVM/NCV Maintenance ConsoleNote• The screenshots shown here are for reference only, and may differ from the screensdisplayed on your PC.• KX-TVM/NCV Maintenance Console uses English as the default language. See step 4 tochange the language.1. Click the KX-TVM/NCV Maintenance Consoleshortcut icon. Its icon is shown here, on the left.2. Select the appropriate VPS model.3. The Set Default Parameters window is displayed thefirst time you start KX-TVM/NCV MaintenanceConsole. Select the TVM/NCV Type, PBX Type, andIntegration Mode. Change the default parameterslisted in the window if necessary, then click OK.Note• If you have already used KX-TVM/NCVMaintenance Console to change theProgrammer Code, the Enter ProgrammerCode dialogue box is displayed. Enter thepreviously set Programmer Code and clickOK.4. The main window is displayed.Note• You can change the display language byclicking Utility→Set Language..., thenselecting the desired language and clickingOK.• To confirm or change the parameters in theSet Default Parameters window afterchanging the display language, click Utility→Default Parameters→Set Default.
