2 Programming ManualIntroductionAbout this ManualThis Programming Manual is designed to serve as an overall reference for programming thePanasonic Voice Processing System using KX-TVM/NCV Maintenance Console. It explains how touse KX-TVM/NCV Maintenance Console, and obtain the most out of system administration.The Programming Manual is divided into the following sections:Section 1, Programming InstructionsDescribes how to install, start, and operate KX-TVM/NCV Maintenance Console.Section 2, KX-TVM/NCV Maintenance Console Operating InstructionsDescribes in detail each parameter that can be programmed using KX-TVM/NCV MaintenanceConsole.GlossaryAn alphabetical listing of features, terms, and abbreviations, as well as their definitions.IndexAn alphabetical listing of features and terms, as well as the page numbers of related sections.About the Other ManualsThe following manuals are available:Installation ManualThe Voice Processing System Installation Manual provides instructions for installing the VPShardware, configuring the connected PBX for use with the VPS, and getting started with the KX-TVM/NCV Maintenance Console software. Relevant sections from the Installation Manual are listedthroughout this manual for your reference.Feature ManualThe Voice Processing System Feature Manual is an overall reference describing VPS features. Itexplains what the VPS can do, and how to obtain the most of its many features. Sections from theFeature Manual are listed throughout this manual for your reference.Subscriber's ManualThe Voice Processing System Subscriber's Manual describes how subscribers can accesscommonly used VPS features and functions with their extensions and mailboxes. Relevant sectionsfrom the Subscriber's Manual are listed throughout this manual for your reference.Note• This manual may refer to products not available in your country/area.• Model number suffixes are omitted throughout this manual.• For KX-TD500, KX-TDA series PBXs, the term "trunk" used in this manual indicates a trunkgroup.