Panasonic KX-TVS75 Subscriber's Manual

Also see for KXTVS200 - VOICE MAIL SYSTEM: Subscriber's guide User guide Installation manual Installation manual

Contents

Panasonic KX-TVS75 Subscriber's Manual Manual pdf 61 page image

4.8 Message Waiting NotificationSpecial Features 614.8 Message Waiting NotificationMessage Waiting Lamp Notification Setting- The VPS illuminates the message waiting lamp of your extensionwhen a new message is recorded in your mailbox.Setting Device Status- For each device, the notification can be enabled, disabled,or enabled to a preset schedule. Setting notification to a preset schedule can only beestablished by the System Administrator.Notification Number Assignment- You can set up to 3 telephone orbeeper numbers to ring when you wish to receive notification calls.1. Log in to your mailbox to access the Main Command Menu.2. Press [6] for Other Features.3. Press [2] to set Message Waiting Notification.The VPS is able to notify you when a newmessage has been recorded in your mailbox.You can be notified (1) by message waitinglamp on your telephone, or (2) by a call toanother telephone (e.g., your mobile phone),or (3) by your beeper. You can assign timeframes to each of these devices.The VPS is also able to notify your beeperwith the callback number of the party wholeft the message. The telephone numberstored on the VPS for your beeper mustinclude the beeper display command.Three features can be set for messagewaiting notification: Message WaitingLamp Status, Change Device Status, andAssign Telephone Number. These featurescan be set by the System Administrator or ata subscriber's telephone. Each device has itsown phone number that must be entered.For Interview Mailbox Management, Press [1].To set up Message Waiting Notification, Press [2].For External Message Delivery, Press [3].Subscriber'sMain Command Menu1 3 4 5 OtherFeatures1 MessageWaitingNotificationSettingInterviewM.B.ManagementExternalMessageDelivery2 3ChangeDeviceStatusMessageWaitingLampStatusAssignTel. No.2 6321