Panasonic KX-UDT111 Operating Instructions Manual

Also see for KX-UDT111: Manual Operating instructions Getting started Getting started

Feature OperationsMaking CallsCallingCalling by Dialing1. Press .2. Dial the outside party’s number.3. Press .4. To end the call, press .PredialingIn standby mode, you can start dialing while stillon-hook. After dialing the number, press to gooff-hook and begin the call.Note• Alternatively, you can seize a specific line formaking the call by pressingFLEX andselecting an idle DN key.• To cancel dialing, press .• If " " flashes, move closer to the CS and dialagain.Using the Outgoing Call LogIf a call is received from a phone number stored in thephonebook, the number and name of the caller will bedisplayed in the call log.1. While in standby mode, press [ ] or .2. Press [ ] or [ ] to select an outgoing call record,and then press .3. To end the call, press .Using the Incoming Call Log1. While in standby mode, press [ ].2. Press [ ] or [ ] to select an incoming call record,and then press .3. To end the call, press .Using the Phonebook1. Press [ ] or .2. Select an item stored in the phonebook, and thenpress .3. To end the call, press .Note• For details about searching for an item in thephonebook, see "Searching for an Item in thePhonebook (Page 27)".• For details about entering characters, see"Entering Characters (Page 36)".• For details about storing an item in thephonebook, see "Storing an Item in the HandsetPhonebook (Page 32)".One-touch DialingYou can make a call with a One-touch operation if aOne-touch Dialing key has been created for the desiredparty. One-touch Dialing keys can also be configured toaccess features of your phone system, if available.1. PressFLEX , and then press the One-touchDialing key (flexible key).2. To end the call, press .Note• For details about Flexible Keys, see "FlexibleKeys (Page 21)".Hot Key DialingYou can assign a phone number to each number keyand then access the desired phone number by simplypressing and holding the assigned number key.1. Press and hold the dialing key (0–9) assigned as aHot Key for more than 1 second.2. Press .Note• While the Hot Key’s information is displayed,you can press [ ] or [ ] to select another HotKey number.• If Hot Key dialing is set to "Auto", a Hot Keynumber can also be dialed by pressing andholding the assigned dialing key for a specifiednumber of seconds. For details, see "Selectingthe Type of Hot Key Dialing (Page 34)".26 Operating Instructions Document Version 2013-03Feature Operations