Panasonic KX-UT670 Operating Instructions Manual

Also see for KX-UT670: Configuration guides Quick user guide Specifications Brochure Manual

Contents

Panasonic KX-UT670 Operating Instructions Manual Manual pdf 50 page image

Receiving Calls1. Go off-hook.2. To end the call, go on-hook.Note• Enabling Automatic Answer allows you toanswer an incoming call without going off-hook(Page 85).• If a network camera is registered in the caller’scontact information, Network Camera Viewerwill start, and you can view the video feed fromthe camera.• When you receive a call while using anotherapplication, the [Incoming Call] window isdisplayed.Selecting from MultipleIncoming CallsWhen you have incoming calls from multiple parties atthe same time, you can select which one to answer.1. On the [Incoming] tab, select the call you want toanswer.2. Tap [Answer].Note• The number of incoming calls is displayed onthe [Incoming] tab.• In the [Incoming] tab, incoming calls aredisplayed from the top in the order of oldest tonewest.Answering a Call While on a Call(Answering Call Waiting)When you receive a second call while on another call,you can answer the second call after either putting thecurrent call on hold or disconnecting it.Disconnecting the Current Call andAnswering the Second Call1. When you hear the call waiting tone, go on-hook.2. Go off-hook.Holding the Current Call andAnswering the Second Call1. On the [Incoming Call] window, tap [Close].2. On the [Current] tab, tap [Hold].3. Tap the DN button (flexible button) of the incomingcall (flashing green rapidly).Note• If automatic call hold is enabled throughconfiguration file programming, simply tapping[Answer] on the [Incoming] window will put thecurrent call on hold and answer the second call.For details, contact your administrator or dealer.Rejecting CallsYou can reject an incoming call at your unit or set theunit to reject certain calls.Rejecting a Call While Receiving1. When receiving an incoming call, press .Rejecting Anonymous CallsYou can set the unit to reject calls when the unitreceives a call without phone number.To reject anonymous calls, the Block Anonymous Callsetting must be enabled through Web user interfaceprogramming (Page 93). For details, consult youradministrator or dealer.Note• Rejected phone numbers will not be stored inthe incoming call log.• Depending on the line an incoming call isarriving on, the call may not be rejected.Rejecting Specific CallsYou can set the unit to reject specific phone numbers.50 Operating Instructions Document Version 2011-09Phone