Editing a Preset’s Name1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Preset].4. In the [Preset] list, touch and hold the preset whosename you want to edit.5. Tap [Edit Preset Name].6. Edit the preset’s name as necessary, and then tap[OK].Note• Tapping [Cancel] returns you to the [Preset]screen.• For details about entering text, see page 23.Deleting a Preset’s Name that YouEdited1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Preset].4. In the [Preset] list, touch and hold the preset whosename you want to delete.5. Tap [Delete Preset Name].Note• Deleting a preset’s name returns it to the factorydefault value (Preset).• Tapping [Cancel] returns you to the [Preset]screen.Configuring DisplayPropertiesYou can adjust the brightness of the network cameraand set up automatic mode.Adjusting the Brightness of thePicture1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Brightness].5. Tap (brighter) or (darker) to adjust thebrightness.6. Tap [Close] to save the setting.Note• Tapping [Reset] in step 5 returns the setting tothe value specified in the camera’s settings.Automatic ModeAuto PanThe camera can be set to pan horizontally (left–right)over its entire viewing range repeatedly.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].5. On the [Auto Mode] screen, tap [Auto Pan].Note• Tapping [Cancel] returns you to the [CameraSettings] screen.Preset SequenceYou can have the camera cycle through and displayviewing positions registered as presets.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].64 Operating Instructions Document Version 2011-09Network Camera
