Rejecting Specific CallsYou can set the unit to reject specific phone numbers.Note• Rejected phone numbers will not be stored inthe incoming call log.Adding a phone numberYou can store a maximum of 30 phone numbers youwant to reject in the rejection list of the unit.1. On the Phone screen, press .2. Tap [Call Block setting].3. Enter the phone number (max. 32 characters).4. Tap [OK].Note• To register additional telephone numbers,repeat the procedure from step 3.Adding a phone number from the incoming calllogYou can add a phone number by referring to theincoming call log.1. On the Phone screen, tap [Call Log].2. Select the [Incoming Call] tab or the [MissedCall] tab.3. Tap the phone number you want to reject calls from.4. Tap [Add to Call Block list].Editing a stored phone number1. On the Phone screen, press .2. Tap [Call Block setting].3. Select the phone number you want to edit.4. After you enter the phone number, tap [OK].Deleting a stored phone number1. On the Phone screen, press .2. Tap [Call Block setting].3. Select the phone number you want to delete.4. Clear the displayed number.5. Tap [OK].Holding a Call1. On the [Current] tab, tap [Hold].Note• When a call has been left on hold for a certainlength of time, the [Recall] window is displayedand you will hear the recall tone.• If Automatic Call Hold is enabled throughconfiguration file programming, simply tappinga flexible button assigned as a DN button(Page 92) will put the call on hold. For details,contact your administrator or dealer.Retrieving a Call on Hold1. On the [Hold] tab, select the call you want toretrieve.2. Tap [Retrieve].Note• The number of calls on hold is displayed on the[Hold] tab.• In the [Hold] tab, calls on hold are displayedfrom the top in the order of oldest to newest.Calls on hold waiting to be transferred or for aconference to start are displayed at the top ofthe list.54 Operating Instructions Document Version 2012-12Phone
