Configuring DisplayPropertiesYou can adjust the brightness of the network cameraand set up automatic mode.Adjusting the Brightness of thePicture1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Brightness].5. Tap (brighter) or (darker) to adjust thebrightness.6. Tap [Close] to save the setting.Note• Tapping [Reset] in step 5 returns the setting tothe value specified in the camera’s settings.Automatic ModeAuto PanThe camera can be set to pan horizontally (left–right)over its entire viewing range repeatedly.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].5. On the [Auto Mode] screen, tap [Auto Pan].Note• Tapping [Cancel] returns you to the [CameraSettings] screen.Preset SequenceYou can have the camera cycle through and displayviewing positions registered as presets.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].5. On the [Auto Mode] screen, tap [PresetSequence].Note• Tapping [Cancel] returns you to the [CameraSettings] screen.Automatic TrackingYou can have the camera automatically follow a movingobject.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].5. On the [Auto Mode] screen, tap [Auto Tracking].Note• Tapping [Cancel] returns you to the [CameraSettings] screen.Cancelling Automatic Mode1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Settings].4. Tap [Auto Mode].5. On the [Auto Mode] screen, tap [Off].Note• Changing the viewing direction in NetworkCamera Viewer, such as by swiping or tappingalso cancels automatic mode.• If another user accesses the same networkcamera and cancels automatic mode orchanges the viewing direction, automatic modewill be cancelled for everyone.70 Operating Instructions Document Version 2012-12Network Camera
