Panasonic KX-UT670 Operating Instructions Manual

Also see for KX-UT670: Configuration guides Quick user guide Specifications Brochure Manual

Contents

Panasonic KX-UT670 Operating Instructions Manual Manual pdf 67 page image

Switching Automaticallyamong Multiple CamerasYou can have the unit cycle through the registerednetwork cameras and display each video feed in turn.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Select].4. In the [Camera Select] list, tap [Sequential].5. Tap [Close].Note• When automatic switching begins, the currentlyselected network camera’s video feed isdisplayed first, and then video feeds aredisplayed in the order in which cameras arelisted in the [Camera Select] list.• Selecting a network camera in the [CameraSelect] list ends automatic switching.• If you touch the display, automatic switching willtemporarily stop on the current video feed. Toresume switching, tap [Sequential] again.While switching is temporarily stopped, doingother operations such as selecting a networkcamera ends automatic switching.Setting the Switching IntervalYou can change the length of time video feeds aredisplayed before being switched.1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Camera Select].4. Press .5. Tap [Sequential Interval].6. Tap the desired length of time.Note• The factory default value is [10 seconds].• If automatic switching is already enabled, youcan skip step 4.Using Network CameraPresetsYou can select a viewing position that has beenregistered in the network camera’s settings beforehand.These are called "presets".1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Preset].4. After you tap [Preset], select the camera positionyou want to view.5. Tap [Close].Note• You can view all the registered presets byscrolling the list up and down.• Tapping [Favorite] in step 4 displays thepresets registered as favorites.Adding a Preset to YourFavorites1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Preset].4. In the [Preset] list, touch and hold the preset youwant to add to your favorites.5. Tap [Add to Favorites].Note• Tapping [Cancel] returns you to the [Preset]list.Deleting from Your Favorites1. On the Home screen, tap .2. In Network Camera Viewer, press .3. Tap [Preset].4. In the [Preset] list, tap [Favorite].5. Touch and hold the preset you want to delete fromyour favorites.6. Tap [Remove From Favorites].Note• Tapping [Cancel] returns you to the [Preset]screen.Document Version 2012-02 Operating Instructions 67Network Camera