Advanced SettingsForward/Do Not DisturbEnabling Do Not Disturb (DND) prevents incoming callsfrom ringing at your unit when you are away from yourseat or otherwise unavailable to answer calls.Forwarding allows you to have incoming callsforwarded to a specified destination when you are awayfrom your seat.1. Tap the status bar.2. Tap [Forward/DND].3. Select the setting to configure.AllForward all calls.If you select this setting, you must also specifythe number to forward calls to.BusyForward calls that arrive while you are on a call.If you enable this setting, you must also specifythe number to forward calls to.No AnswerForward calls after you do not answer for aspecified length of time.If you enable this setting, you must also specifythe number to forward calls to and the numberof times the unit rings before the call isforwarded.Do Not DisturbPrevent calls from ringing at your unit.4. When you have finished, tap [OK].Note• FWD/DND can be enabled only when the unitis idle or during pre-dialing.• If multiple lines are configured on your unit,select the tab of the line to configure after step2.• You can enable multiple settingssimultaneously.If multiple settings are enabled, the priority ofthe settings is as follows:1. Call Block, Block Anonymous Call2. All3. Do Not Disturb4. Busy5. No Answer• You cannot enable FWD/DND on a shared line.Canceling FWD/DND1. Tap the status bar.2. Tap [Forward/DND].3. Deselect the check box.4. Tap [OK].90 Operating Instructions Document Version 2012-02Advanced Settings
