Panasonic KX-VC300 User Manual

Also see for KX-VC300: Brochure & specs Frequently asked questions Manual Brochure Operating manual

Contents

Panasonic KX-VC300 User Manual Manual pdf 109 page image

5. Press [Enter].• The operation log will begin saving.Note• While the operation log is being saved, donot remove the USB memory device. Thiscould damage the unit or corrupt the data.• The file saved to the USB memory devicewill be named "hdvclogall_XXXX.tar". Thesoftware version you are using is displayedas "XXXX".The file name of the operation log is alwaysthe same: "hdvclogall_XXXX.tar".Therefore, each time you save theoperation log, previous data on the USBmemory device will be overwritten. To keeppreviously saved data, make a backup ofthat data before saving the new data.6. Check the result (successful/failed) and press[Enter].• The admin menu screen is displayed.7. Press [Home].• The Home screen is displayed.8. Remove the USB memory device.Note• To prevent data leakage from the USB memorydevice, make sure to erase all data from theUSB memory device before disposing of,lending, or returning it.Making HDMI Settings (forChecking Operation)Note• This setting is for verifying HDMI operation. Thissetting does not need to be changed usually.Making Local SiteSettingsYou can register up to 10 local sites. The same unit canbe used in multiple meeting rooms without the need tochange the network or connection mode settings.Registering a Local Site1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Select local site" andpress [Enter].• The select local site screen is displayed.3. Use [ ][ ] to select "Not Registered" and press[B].• The local site settings screen is displayed.4. Use [ ][ ] to select the following items for input:• The following items are displayed over 2 pages.To view all the items, press [R] to move to thenext page, and press [B] to move to theprevious page.• If you press [G] on the first or second pages, thesettings for both screens will be saved.Note• If any required settings are not specified oneither of the screens, the settings will not besaved even if you press [G] on either of thescreens. Save the settings only after youhave specified all the required settings. Thefollowing settings are required:User Manual 109Contacts and Settings