– "OFF" (default): Disables noise reduction.5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The system settings screen is displayed.7. Press [Home].• The Home screen is displayed.Making Screen StandbySettingsWhen the remote control is not operated or a videoconference call is not received for a specified length oftime, the unit enters standby mode. You can set thelength of time here.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Use [ ][ ] to select "Standby Setting" andpress [Enter].• The screen standby settings screen isdisplayed.4. Enter the length of time (0–99) in minutes until theunit enters screen standby mode (default: 10).Note• If you set "0", the unit will not enter screenstandby mode automatically. However, ifyou press the remote control’s [Video OutOn/Off] button, the unit will enter screenstandby mode even if "0" is set.5. Press [G].• A dialogue box to confirm the saving of settingsis displayed.6. Use [ ][ ] to select "Yes" and press [Enter].• The system settings screen is displayed.7. Press [Home].• The Home screen is displayed.Making Sound Settings1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "Settings" and press[Enter].• The system settings screen is displayed.3. Press [ ].• The second page is displayed.4. Use [ ][ ] to select "Sound Settings" and press[Enter].• The sound settings screen is displayed.User Manual 91Contacts and Settings
