Page 1-41-1-5 Improved OperationThe adoption of the LCD color touch panel on the operating part offers very clear vision. Also itmakes easy to exchange Japanese and English.Tree jump functionThe specified screen appears on any screen by using this, saving time.Layered operationThe improper operation is reduced to a minimum by classifying the operating screens intoeach mode for the operator and engineer.Using the data creating unit PT100 enables to create data even during running the machine.It is possible to create all data of PT100 support models all together.1-1-6 Automatic Printing Condition Setting (for Each Type of Solder)As there are various characteristics for each type of solder, it needs skills and takes much time toset the printing condition of the machine for each solder.The printing condition is set for each solder in SP22P-M, and even the operator without much skillcan easily create data by loading prepared data all together.6 patterns are available for each type of solder as our standard library.Besides, 14 patterns can be added as for the user’s creation.PT100 support modelsHigh-speed screen printer SP22P-MHigh-speed adhesive dispenser BD30S-MHigh-speed chip mounter CM88C-MMulti-functional chip mounter CM100-MThe system for data creationPT100193C-051E193C-E-EMA01-A01-00Characteristics of Machine193C-052EPrintConditionFile(F) @Help(H)AARead from LibraryPatternLibrary @ @ @ @ @ @ @ @ ¥ ReferenceAAAAAAAPreviousAANextAAACancelAAOKAAAA100 050 0eqeq350 60FlatSq¥30 300.5 5 2 Const{Direction [DirectionMask-+AAPrintConditionAAAAAAReturn to LibDataAAAAAAReflect to LibDataAAAA´ ¶ ØAACleaningDataAAAPrintCounterSqueegeePrintScopeMotionModeSpeed (mm/s) Pressure (g/mm) Length (mm) Kind Angle (default)Single Lift100 0.00050 0.000eqeq350.000 60FlatSqPriorityAfterPrint30.000 30.000Offset F (mm) Offset R (mm)0.500 5.0Lift Clearance (mm) DWSpeed (mm/s) DWStroke (mm) ChangeLeaveSpeed2.00 Const{Direction [DirectionMask-+¥¥¥PrintCondition CleaningData PrintCounterSqueegeeMotionMode PriorityAfterPrintSingle LiftSpeed (mm/s) Pressure (g/mm) Length (mm) Kind Angle (default)PrintScopeOffset F (mm) Offset R (mm)Lift Clearance (mm) DWSpeed (mm/s) DWStroke (mm) ChangeLeaveSpeed
