- 171 -Advanced (Playback)You can copy the data of the pictures you have taken from the built-in memory to a card orfrom a card to the built-in memory.Select [COPY] on the [PLAYBACK] Mode menu. (P27)Press 3/4 to select the copy destination and thenpress [MENU/SET].Press 2/1 to select the picture and then press [MENU/SET].Press 3 to select [YES], and then press [MENU/SET].• Pressing [MENU/SET] during copying will cancel the copypartway through.• Do not turn the camera off at any point during the copyingprocess.Press [‚] to return to the menu screen.• Press [MENU/SET] to close the menu.• If you copy from the built-in memory to a card, all the pictures are copied and then thescreen automatically returns to the playback screen.Note• Image data can be copied only partway when there is not enough space in the card when[ ] is selected. We recommend using a card which has more free space than the built-inmemory (about 40 MB).• If a picture exists with the same name (folder number/file number) as the picture to be copied inthe copy destination when [ ] is selected, a new folder is created and the picture is copied.If a picture exists with the same name (folder number/file number) as the picture to be copied inthe copy destination when [ ] is selected, that picture is not copied. (P202)• It may take time to copy the picture data.• Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.(Even if the pictures were recorded with a Panasonic digital camera, you may not be able tocopy them if they were edited with a PC.)• Print settings on the original picture data will not be copied. Set the print settings again aftercopying is finished.• Motion picture recorded in [AVCHD Lite] cannot be copied.[COPY]: All the picture data in the built-in memory are copiedonto the card at one time. > step 4.: One picture at a time is copied from the card to thebuilt-in memory. > step 3.
