- 179 -Connecting to other equipmentSaving the recorded still pictures and motionpicturesMethods to export still pictures and motion pictures to other devices will vary depending onthe file format. (JPEG, RAW, AVCHD Lite, or Motion JPEG). Here are a few suggestions.File formats that can be used: [AVCHD Lite], [Motion JPEG]Copy images played back with this unit to DVD disc, hard disk, or video using a DVDrecorder, or video.This can be played back with equipment that is not compatible with high definition(AVCHD), so it is convenient for distributing copies. Image will be standard quality insteadof high definition at this time.1 Connect this unit with the recording equipment with an AV cable (supplied).2 Start the playback of this unit.3 Start the recording on the recording equipment.• When ending the recording (copying), stop the playback on this unit after stopping therecording in recording equipment.Note• When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT] (P36)on this unit to [4:3] before starting a copy. The image will be vertically long if you play backmotion pictures copied with [16:9] setting on a [4:3] aspect TV.• Do not use any other AV cables except the supplied one.• It is recommended to turn off the display of the screen by pressing the [DISPLAY] on thecamera while copying. (P60)• See the instruction manual for the recording equipment about the details of copying and playingback.Copy the playback image using an AV cable1 Yellow: to the video input socket2 White: to the audio input socket3 Red: to the audio input socketA AV cable (supplied)DIGITAL/AV OUT
