Connecting to other equipment80VQT0V10∫ Setting the date printing with theDPOF print in advanceWe recommend setting DPOF date printingwith [DPOF PRINT] (P70) in advance whenthe printer supports it. If you select[DPOF PICTURE], printing starts and therecording date is printed.∫ Layout printing• When printing a picture several timeson 1 sheet of paperFor example, if you want to print a picture4 times on 1 sheet of paper, set[PAGE LAYOUT] to [ ] and then set[NUM. OF PRINTS] to 4.• When printing different pictures on1 sheet of paper (only in DPOFprinting)For example, if you want to print 4 differentpictures on 1 sheet of paper, set[PAGE LAYOUT] to [ ] and then set[COUNT] in [DPOF PRINT] (P68) to 1 foreach of the 4 pictures.• Do not disconnect the USB connectioncable when the cable disconnectionwarning icon [ ] is displayed.(Depending on the printer, the icon maynot be displayed.)• If the remaining battery power becomeslow while the camera and the printer areconnected, the status indicator blinks andthe alarm beeps. If this happens duringprinting, press [MENU/SET] and stopprinting at once. If not printing, disconnectthe USB connection cable.• The camera is receiving an error messagefrom the printer when the [¥] indicationlights orange during printing. Afterfinishing printing, make sure there are noproblems with the printer.• If the total number of DPOF prints or thenumber of DPOF pictures printed is high,pictures may be printed several times. Theremaining number of prints indicated maydiffer from the number set. This is not amalfunction.• With date printing, the setting on theprinter may take priority over the settingon the camera. Check the date printsetting on the printer also.
