Panasonic Lumix DMC-LS60 Operating Instructions Manual

Also see for DMC-LS70S - Lumix Digital Camera: Instrucciones de funcionamiento

Contents

87VQT1C63Connecting to other equipmentConnecting to a PictBridge-compliant PrinterBy connecting the camera directly to aprinter supporting PictBridge via the USBconnection cable (supplied), you can selectthe pictures to be printed or start printingon the LCD monitor. Make the necessarysettings on your printer beforehand. (Readyour printer’s operating instructions.)1 Turn on the camera and the printer.2 Set the mode dial to [ ].• [PLEASE CONNECT TO THE PRINTER]appears.3 Connect the camera to a printervia the USB connection cable A(supplied).• Connect the USB connection cable withthe [c] mark facing the [q] mark onthe [DIGITAL] socket.• Hold C and then insert or pull the USBconnection cable straight.• Do not use any other USB connectioncables except the supplied one.• When you connect the camera to aprinter without setting the mode dial to[ ], remove the cable, set the modedial to [ ], turn the camera and theprinter off and on, and connect again.• If a card is not inserted when the camera isconnected to the printer, you can print thepicture data on the built-in memory. If a cardis inserted, you can print the picture data on it.• You cannot switch between the built-inmemory and the card while the camera isconnected to the printer. When you want toswitch between the built-in memory and thecard, disconnect the USB connection cable,insert (or remove) the card and then connectthe USB connection cable to the printer again.• To print the age in [BABY1]/[BABY2]and [PET] in scene mode (P47) or thedeparture date for [TRAVEL DATE] (P55),use the software [LUMIX Simple Viewer] or[PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied) and print from the PC. Forinformation about this, refer to the separateoperating instructions for PC connection.• To find out more about PictBridge compliantprinters, contact your local dealer.■ To connectA : USB connection cable (supplied)B : AC adaptor (DMW-AC6; optional)• It may take time to print some pictures. Usebatteries with suffi cient battery power (P24)or the AC adaptor (DMW-AC6; optional)when you connect to a printer.• Make sure this unit is off beforeconnecting or disconnecting the ACadaptor (DMW-AC6; optional).C : Check the facing of the connector andpush straight in.ABDIGITALV.OUTDC IN3VC